orn www.vishay.com vishay dale thin film revision: 02-sep-11 1 document number: 60005 for technical questions, contact: thinfilm@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 molded, 50 mil pitch, dual-in-line thin film resistor, surface mount network orn series resistor networks fe ature four isolated resistors with standard 50 mil pitch lead spacing. the networks feature close tcr tracking and tight ratio tolerance and are ideally suited for unity gain operational amplifier circuitry. the standard resistance offeri ng listed are available for immediate delivery. schematic features ? 0.068" (1.73 mm) ma ximum seated height ? rugged molded case construction with no internal solder ? low temperature coefficient ( 25 ppm/c) ? jedec ms-012 std variation aa package ? compliant to rohs directive 2002/95/ec ? halogen-free according to iec 61249-2-21 definition note * pb containing terminations are not rohs compliant, exemptions may apply typical performance note ? consult factory for additional values and schematics actual size 8 r 1 1 7 r 1 2 6 r 1 3 5 r 1 4 absolute tracking tcr 25 5 absolute ratio tol. 0.1 0.05 standard resistance offering (r 1 =) 49.9 ? 10 k ? 100 ? 20 k ? 500 ? 50 k ? 1 k ? 100 k ? 2 k ? 200 k ? 4.99 k ? 500 k ? 5 k ? standard electrical specifications test specifications conditions material passivated nichrome - pin/lead number 8- resistance range 33 ? to 500 k ? per resistor - tcr: absolute 25 ppm/c - 55 c to + 125 c tcr: tracking 5 ppm/c - 55 c to + 125 c tolerance: absolute 0.05 % to 1.0 % + 25 c tolerance: ratio 0.01 % to 0.5 % + 25 c power rating: resistor 100 mw maximum at + 70 c power rating: package 400 mw maximum at + 70 c stability: absolute ? r 0.05 % 2000 h at + 70 c stability: ratio ? r 0.015 % 2000 h at + 70 c voltage coefficient 0.1 ppm/v (typical) - working voltage 100 v max. not to exceed - operating temperature range - 55 c to + 125 c - storage temperature range - 55 c to + 150 c - noise < - 30 db - thermal emf 0.08 v/c - shelf life stability: absolute ? r 0.01 % 1 year at + 25 c shelf life stability: ratio ? r 0.002 % 1 year at + 25 c p x r
orn www.vishay.com vishay dale thin film revision: 02-sep-11 2 document number: 60005 for technical questions, contact: thinfilm@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note ? marking - vishay symbol, part number from ordering information notes (1) tol. available 1k and up (2) preferred packaging code (3) ratio tolerance available 250 ? and up dimensions and imprinting in inches and millimeters dimension inches millimeters a 0.157 3.99 b 0.0165 0.0025 0.4 0.06 c 0.050 1.27 d 0.195 max. 4.93 e 0.008 0.001 0.20 0.03 f 0.028 0.001 0.71 0.02 g 0.239 0.005 6.07 0.13 h 0.068 max. 1.73 i 0.008 0.002 0.22 0.06 ? 2 to 6 2 to 6 i resistance value code seating plane a b c e h g f ? d orna x x x x date code mechanical specifications resistive element passivated nichrome substrate material silicon body molded epoxy terminals copper alloy lead (pb)-free option 100 % matte tin tin lead option sn90 tin lead and lead (pb)-free finish plated derating curve ambient temperature c 0 70 125 150 0 20 40 60 80 100 precent of rated power 100 % = 0.40 w global part number information new global part nu mbering: orna1002auf global model (3 or 4 digits) schematic resistance tolerance and ratio tolerance packaging orn (tin lead) ornt (lead (pb)-free) (e3) a = 4 isolated equal resistors the first 3 digits are significant figures and the last digit specifies the number of zeros to follow. r designates the decimal point. example: 1002 = 10 k ? 1003 = 100 k ? 4991 = 4.99 k ? 50r0 = 50 ? abs. tol. a = 0.1 % (3) b = 0.1 % c = 0.25 % d = 0.5 % f = 1 % q = 0.05 % (1) z = 0.1 % (1) ratio 0.05 % 0.1 % 0.1 % 0.1 % 0.5 % 0.01 % 0.025 % tape and reel t0 = 100 min., 100 mult t1 = 1000 min., 1000 mult (2) t3 = 300 min., 300 mult t5 = 500 min., 500 mult tf = full reel 3000 ts = 100 min., 1 mult uf = tubed historical part number example: orna1001f (for reference purposes only) orn a 1001 f series schematic resistance tolerance and ratio tolerance nta1 0 0 3zts r o na1002auf r o
legal disclaimer notice www.vishay.com vishay revision: 08-feb-17 1 document number: 91000 disclaimer ? all product, product specifications and data ar e subject to change with out notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of th e products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, includ ing warranties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain types of applicatio ns are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular applic ation. it is the customers responsibility to validate tha t a particular product with the prope rties described in the product sp ecification is suitable for use in a particular application. parameters provided in datasheets and / or specifications may vary in different ap plications and perfor mance may vary over time. all operating parameters, including ty pical parameters, must be va lidated for each customer application by the customer s technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product could result in personal injury or death. customers using or selling vishay product s not expressly indicated for use in such applications do so at their own risk. please contact authorized vishay personnel to obtain writ ten terms and conditions rega rding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners. ? 2017 vishay intertechnology, inc. all rights reserved
|
